WS-C2960XR-48TD-I Overview
Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48TD-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports and two 10G SFP+ uplinks. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.
Quick Specs
Table 1 shows the Quick Specs.
Product Code | WS-C2960XR-48TD-I |
Enclosure Type | Rack-mountable – 1U |
Feature Set | IP Lite |
Uplink Interfaces | 2 x 10G SFP+ |
Ports | 48 x 10/100/1000 Ethernet Gigabit ports |
Forwarding Bandwidth | 108Gbps |
Maximum stacking number | 8 |
Stack bandwidth | 80G |
Switching Bandwidth | 216Gbps |
RAM | 512 MB |
Flash Memory | 128 MB |
Dimensions | 44.5 cm x 40.8 cm x 4.45 cm |
Package Weight | 16.15 Kg |
Product Details
Figure 1 shows the front panel of WS-C2960XR-48TD-I.
Note:
·There are Forty-eight 10/100/1000 Ethernet Gigabit Ports and Two 10G SFP+ uplinks on the front panel.
·Two USB Type A ports and one USB mini-Type B (console) port are on the left.
·This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.
The WS-C2960XR-48TD-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.
The Accessories
Table 2 shows some accessories of WS-C2960XR-48TD-I.
Models | Description |
C2960X-STACK | Catalyst 2960-X FlexStack Plus Stacking Module |
CAB-STK-E-0.5M | Cisco FlexStack Stacking Cables |
GLC-LH-SMD | Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
GLC-SX-MMD | 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
CAB-CONSOLE-RJ45 | Console Cable 6ft with RJ45 and DB9F |
CAB-CONSOLE-USB | Console Cable 6 ft with USB Type A and mini-B |
Compare to Similar Items
Table 3 shows the comparison of similar items.
Models | WS-C2960XR-48TS-I | WS-C2960XR-48TD-I |
Ports | 48 x 10/100/1000 Ethernet Gigabit ports | 48 x 10/100/1000 Ethernet Gigabit ports |
Uplinks | 4 x 1G SFP | 2 x 10G SFP+ |
Feature Set | IP Lite | IP Lite |
FlexStack-Plus Stacking | Optional | Optional |
WS-C2960XR-48TD-I Specification
WS-C2960XR-48TD-I Specification |
|
Enclosure type | Rack-mountable – 1U |
Ports | 48 x 10/100/1000 + 2 x 10 Gigabit SFP+ |
Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
Available PoE Power | None |
Forwarding bandwidth(Gbps) | 108Gbps |
Maximum stacking number | 8 |
Stack Bandwidth | 80G |
Forwarding Performance | 130.9Mpps |
Switching bandwidth | 216Gbps |
Maximum active VLANs | 1023 |
MAC Address Table Size | 16K (default) |
CPU | APM86392 600MHz dual core |
RAM | 512 MB |
Flash Memory | 128 MB |
Status Indicators | ● Per-port status: Link integrity, disabled, activity, speed, and full duplex ● System status: System, RPS, Stack link status, link duplex, and link speed |
Expansion / Connectivity | |
Console ports | USB (Type-B), Ethernet (RJ-45) |
Expansion Slot(s) | 1 FlexStack-Plus slot and 1 power redundant slot |
Stack Modules | C2960X-STACK |
Stacking cable | ● CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length ● CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length ● CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length |
Power supply | PWR-C2-250WAC |
Power Device | Power supply – redundant – plug-in module |
Power Redundancy | optional |
Voltage range (Auto) | 110V-240V |
Power Consumption Operational | 0.047kVA |
Miscellaneous | |
Width | 17.5 Inches (44.5 cm) |
Depth | 16 Inches (40.8 cm) |
Height | 1.75 Inches (4.45 cm) |
Weight | 13.3 Pounds (6.1Kg) |
Package Weight | 35.6 Pounds (16.15 Kg) |
Rack Mounting Kit | Optional |
MTBF in hours | 440,880 |
Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol ● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af and IEEE 802.3at ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T ● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 ● IEEE 802.3az ● IEEE 802.3ae 10Gigabit Ethernet ● IEEE 802.1ax |
System software / license | |
System software | IOS IP Lite |
license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
features | ● IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub) ● Advanced IP unicast routing protocols (OSPF for Routed Access) ● EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite. ● Equal-cost routing ● Policy-based routing (PBR) ● Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) ● Protocol Independent Multicast (PIM) |
Network security | ● MAC-based VLAN assignment enables ● Cisco TrustSec uses ● Comprehensive 802.1X ● IPv6 First-Hop Security ● Device Sensor and Device Classifier ● Cisco Trust Anchor Technology ● Cisco Threat Defense ● Private VLANs ● Unicast Reverse Path Forwarding (uRPF) ● Multidomain Authentication ● Access Control Lists (ACLs) ● Switched Port Analyzer (SPAN) ● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) ● TACACS+ and RADIUS authentication ● MAC Address Notification ● Multilevel security on console access BPDU Guard ● Spanning Tree Root Guard (STRG) ● IGMP filtering |
Management & Troubleshooting | ● Auto-MDOX ●TDR ● UDLD ● IP SLA Responder
● layer 2 / IP Traceroute ● SPAN ● RSPAN ● Express Setup ● Device Manager ● Cisco Network Assistant ● Smartports + Advisor ● Troubleshooting Advisor ● Drag-and-drop Cisco IOS Upgrade ● IP Address DHCP ● Autoinstall with saved configuration ● Configuration Replace ● DHCP Auto Image Upgrade ● DHCP Port Based Allocation ● Error Disable MIB |
Technical Support and Services | ● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco Smart Care Service
● Cisco SP Base Service ● Cisco Focused Technical Support Services |
Environmental Ranges | |
Operating temperature up to 5000 ft (1500 m) | 23ºF to 113º (-5ºC to 45ºC) |
Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF (-5ºC to 40ºC) |
Short-term exception at sea level* | 23ºF to 131ºF (-5ºC to 55ºC) |
Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF (-5ºC to 50ºC) |
Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF (-5ºC to 45ºC) |
Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF (-5ºC to 40ºC) |
Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF (-25º to 70ºC) |
Operating altitude | Up to 10,000 (Up to 3000 Meters) |
Storage altitude | Up to 13,000 (Up to 4000 Meters) |
Operating relative humidity | 10% to 95% noncondensing |
Storage relative humidity | 10% to 95% noncondensing |
Express your opinion about this product